Düşünceleriniz Bizim İçin Önemli!
Sharp 10 is a one-phase 230V charger designed for harsh environments. All Sharp 10 chargers has IP65 enclosure and are suitable for onboard mounting. They are available up to 550 W. Some sizes are available for 110V.
Sharp is an energy-efficient high frequency battery charger. It is a regulated, primary switched charger with charging curves that suit most battery types and applications. The charging process is optimized so that the battery is fully charged in the shortest time possible, with as low water consumption and wear on the battery as possible. Many of the Sharp chargers are a perfect choice for on-board charging.
The Sharp chargers are controlled by the integrated microcomputer. The chargers are equipped with 1 to 3 charging curves as standard, including in most models one with ionic mixing, which efficiently reduces the charging time.
Charging progress is indicated by a diode that glows orange during charging, green at full charge and flashes red if an error occurs.
– The charger requires a counter voltage from a battery in order to start.
– The outlet is protected electronically against faulty connections and short-circuit.
– The charger works with different shutoff times. If these times are exceeded, the charger is turned off.
– Automatic output limitation if cooling is insufficient.
– Soft start before the charger reaches full output.
Battery voltage | Current (A) | Number of phases | Primary voltage, min-max (v) | 8 hours cap.ah/5h | 10 hours cap.ah/5h | Cabinet size | Weight (kg) |
12 | 7 | 1-phase | 110 - 230 | 29 | 38 | P2 | 0,9 |
10 | 1-phase | 220 - 240 | 41 | 55 | P1 | 1,6 | |
17 | 1-phase | 220 - 240 | 69 | 93 | P1 | 1,6 | |
24 | 4 | 1-phase | 110 - 230 | 16 | 22 | P2 | 0,9 |
11 | 1-phase | 220 - 240 | 45 | 60 | P1 | 1,6 |