Düşünceleriniz Bizim İçin Önemli!
Sharp 30 (previously Robust) is a one-phase 230 V charger with an IP54 enclosure, designed for harsh environments. As an option the Sharp 30 can be delivered with an IP66 enclosure.
Sharp 30 is available in capacities up to 3 kW.
Sharp is an energy-efficient high frequency battery charger. It is a regulated, primary switched charger with charging curves that suit most battery types and applications. The charging process is optimized so that the battery is fully charged in the shortest time possible, with as low water consumption and wear on the battery as possible. Many of the Sharp chargers are a perfect choice for on-board charging.
The Sharp chargers are controlled by the integrated microcomputer. The chargers are equipped with 1 to 3 charging curves as standard, including in most models one with ionic mixing, which efficiently reduces the charging time.
Charging progress is indicated by a diode that glows orange during charging, green at full charge and flashes red if an error occurs.
– The charger requires a counter voltage from a battery in order to start.
– The outlet is protected electronically against faulty connections and short-circuit.
– The charger works with different shutoff times. If these times are exceeded, the charger is turned off.
– Automatic output limitation if cooling is insufficient.
– Soft start before the charger reaches full output.
Moisture resistant, Dusty environment, Outdoor use, Cold store, Tropical environment
Battery voltage | Current (A) | Number of phases | Primary voltage, min-max (v) | 8 hours cap.ah/5h | 10 hours cap.ah/5h | Cabinet size | Weight (kg) |
24 | 40 | 1-phase | 195 - 264 | 330 | 440 | S10 | 4,8 |
40 | 1-phase | 195 - 264 | 330 | 440 | S13 | 5,4 | |
70 | 1-phase | 195 - 264 | 577 | 770 | S14 | 6,4 | |
80 | 1-phase | 195 - 264 | 659 | 880 | S11 | 5,3 | |
105 | 1-phase | 195 - 264 | 865 | 1155 | S12 | 5,3 | |
36 | 22 | 1-phase | 195 - 264 | 181 | 242 | S13 | 5,4 |
22 | 1-phase | 195 - 264 | 181 | 242 | S10 | 4,8 | |
45 | 1-phase | 195 - 264 | 371 | 495 | S14 | 6,4 | |
53 | 1-phase | 195 - 264 | 437 | 583 | S11 | 5,3 | |
48 | 20 | 1-phase | 195 - 264 | 165 | 220 | S10 | 4,8 |
20 | 1-phase | 195 - 264 | 165 | 220 | S13 | 5,4 | |
35 | 1-phase | 195 - 264 | 288 | 385 | S14 | 6,4 | |
40 | 1-phase | 195 - 264 | 330 | 440 | S11 | 5,3 | |
60 | 1-phase | 195 - 264 | 494 | 660 | S12 | 5,3 |
Our stands fit all Access, Lion and Sharp chargers. The stands are available in two models, one bench and one floor stand.
All our chargers will automatically start when the battery charger is connected to the battery. Likewise it will automatically stop when the charger is disconnected. This option eliminates the risk of sparks when disconnecting the charger.